ULTRASONIC LEVEL METERS

ULTRASONIC LEVEL TRANSMITTER

The ultrasonic level transmitters have 4 configuration and calibration modes:
1. via a programming module that can be inserted and disconnected on board. The module is equipped with a large matrix LCD display.
2. via MODBUS RTU via PC with USB / RS485 interface and communication software 010F105A;
3. via HART, via Hand-Held, or a HART modem connected to a PC with SW010E105A.
4. via BLUETOOTH via the Android App (4-wire versions only).
Thanks to the non-contact technology, it finds applications in systems where it needs to minimize maintenance costs. The removable display module makes it possible to use the latter both as a fixed display and as a programming module. 2-wire and 4-wire versions are available: 2-wire with HART communication and ATEX certification; 4 wires with MODBUS communication and 2 relays.

Data sheet

IP68 ULTRASONIC LEVEL TRANSMITTER FROM 0.05 ÷ 1.5 m

The application of non-intrusive measurement systems is still the preferred one. For this reason we have developed this level / distance transmitter. This unit offers, together with its compactness, a singular simplicity of commissioning. The calibration and configuration of these transmitters is possible, even remotely, thanks to a MODBUS RTU connection together with the related PC software, or via the display and power supply unit. The degree of protection IP68 allows the application in wells under the walking surface.

Data sheet

IP68 ULTRASONIC LEVEL TRANSMITTER FROM 0.3 ÷ 6 m

The application of non-intrusive measurement systems is still the preferred one. For this reason we have developed the level / distance transmitter. The unit offers, together with its compactness, a singular simplicity of commissioning. The calibration and configuration of the transmitters is possible, even remotely, thanks to a MODBUS RTU connection together with the relative PC software, or via the display and power supply unit. The degree of protection IP68 allows the application in wells under the walking surface. The application for configuration and programming via bluetooth, available on Google Play, is compatible with smartphone devices, from the main manufacturers, with ANDROID 4.2 and later operating systems. it is possible to read the measurements detected by the meter and set the sensor configuration parameters. The smartphone terminal must be equipped with the BLUETOOTH device of class 1 and version 2.1. The maximum reception / transmission distance is 15m in open air.

Data sheet